Loading ...
Loading ...
Loading ...
Before use:
After unpacking the blender, wash everything, except the motor unit (F), in warm soapy water. Rinse
and dry thoroughly. Wipe the motor unit (F) with a damp cloth or sponge.
DO NOT IMMERSE THE MOTOR UNIT (F) IN WATER. Care should be taken when handling the
blades as they are very sharp.
Using the blender:
With the break resistant jar, you can make a variety of ice-based
preparations with your blender.
1- Place the mix stick holder (E) on the motor unit (F) (fig. 1).
2- Place the jar (C) onto the motor unit (F) (fig. 2). You can place it with the
handle either to the left or to the right of the soft touch electronic
keyboard.
3- Put ingredients to be mixed into the jar (C) without exceeding the
maximum level (50 oz) (fig. 3).
4- Lock the lid (B) with the measuring cup (A) inside the lid (fig. 4).
The lid must always be in place while the appliance is in operation.
Note:
- Remove the measuring cup (A) if you want to add more ingredients.
- You can add liquid when the mix stick is in place though the filling hole of
the mix stick (D) (fig. 5)
Electronic keyboard functions (G):
Continuous operation:
Speeds 1 to 5 (shred, mix, blend, liquify, puree). Please see table on next page
for a list of recommended speeds for each type of preparation. You will notice
that the blades first perform a few fast turns, then gradually ramp up to the
desired speed: this is an electronic control designed to optimize the mixing
process. It is possible to change speeds during a preparation by simply
pressing the desired speed.
Pulse function:
This function gives finer control over the degree of blending for precise,
efficient preparations. The blender will run on this function as long as you
keep the pulse button pressed.
Ice crush function:
This function automatically operates the motor intermittently for the
preparation of finely crushed ice, smoothies or granitas. Put ice cubes into the jar (C) and put the lid
on. You do not need to add water. Press the “Ice crush” button. Stop the appliance when the mix is
complete by pressing the “Stop” button. For finely crushed ice, work with 10 large ice cubes (0.71 oz)
USING YOUR APPLIANCE
6
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
Loading ...
Loading ...
Loading ...