Loading ...
Loading ...
Loading ...
4
Control Panel and Features
NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are
registered, touch the control panel with your nger tip, not your ngernail. When selecting a setting or option, simply touch its name.
Cycle Status Lights
Delay Wash – If a Delay Wash is set, the Delay Wash
indicator will light and the delay time will count down
in the display.
Door Locked – Door Locked will light to indicate that
the door is locked and cannot be opened without rst
pausing or canceling the cycle.
Add Garment – When “Add Garment” is lit, you may
pause the washer, open the door, and add items. Touch
and hold START to start the washer again.
Done – Once the cycle is complete, this light will come
on. Remove the load promptly for best results.
Efciency Monitor – The Efciency Monitor allows you
to see how the settings you select affect your energy
savings. To use the Efciency Monitor, choose the best
cycle, temperature, spin speed, and options for the
fabrics being washed. The Efciency Monitor will rate
the water and energy use of those selections, from Good
to Best. You can then adjust the settings and options to
decrease the amount of energy used within that cycle.
Wash Temp
The recommended wash temperature is preset for each cycle.
You may also select a wash temperature based on the type
of fabric and soils being washed. For best results, follow the
garment label instructions. All wash temperatures feature a
cold rinse.
Spin
This washer automatically selects the spin speed based on
the cycle selected. Some preset speeds can be changed.
n Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
n Slower spin speeds reduce wrinkling but will leave
your load more damp.
3
4
2
1
5
6
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
NOTE: Turning the Wash Cycle knob will also turn the
washer on.
WASH CYCLE KNOB
Turn the knob to select a cycle for your laundry load. An LED
will light up for the cycle selected.
NOTE: The Clean Washer with affresh
®
LED will ash when
the washer has run 30 wash cycles as a reminder to run the
Clean Washer with affresh
®
cycle.
See “Cycle Guide” for detailed descriptions of cycles.
START
Touch and hold until the light above START comes on to start
a cycle, or touch once while a cycle is in process to pause it.
If you want to add a garment, you can touch START when the
“Add Garment” LED is on.
DELAY WASH
Use + and – to delay the start of the wash cycle by up to
8 hours. To turn off Delay Wash, use + and – to set the delay
time to “0,” or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed (for times
longer than 99 minutes, hours will be displayed, followed
by minutes). Factors such as load size, wash temperature,
and water pressure may affect the time shown in the display
during the cycle. Tightly packing garments, unbalanced loads,
or excessive suds may cause the washer to adjust the cycle
time, as well.
Touch the desired setting along the bottom of the display to
adjust. See “Cycle Guide” for available settings on each cycle.
Not all settings are available with all cycles.
1
2
3
4
5
Loading ...
Loading ...
Loading ...