Loading ...
Loading ...
Loading ...
4
This Use & Care Guide provides general oper-
ating instructions for your model. Use the unit
only as instructed in this Use & Care Guide.
Before starting the unit, follow these
important rst steps.
Location
Choose a place that is near a grounded
electrical outlet.
For the most ecient operation, the appliance
should be located where surrounding tempera-
tures will not exceed 110°F (43°C). Tempera-
tures of 32°F (0°C) and below will NOT aect
operation. Additional compressor heaters are
not recommended.
Allow space around the unit for good air circu-
lation. Leave a 4 inch (101.6 mm) space on all
sides of the unit for adequate circulation.
INSTALLATION
Cleaning
• Wash any removable parts of the
appliance interior and exterior with mild
detergent and warm water. Wipe dry.
DO NOT USE HARSH CLEANERS ON
THESE SURFACES.
• Do not use razor blades or other sharp in-
struments which can scratch the appliance
surface when removing adhesive labels.
Any glue left from the tape can be removed
with a mixture of warm water and mild de-
tergent or the residue can be touched with
the sticky side of tape already removed.
DO NOT REMOVE THE SERIAL LABEL.
Leveling (optional)
Extend Retract
NOTE
It is VERY IMPORTANT for your freezer to be
level in order to function properly. If the unit
is not leveled during installation, the lid may
be misaligned and not close or seal properly,
causing cooling, frost, or moisture problems.
Use the leveling legs (located on the left side,
front and rear) to ensure that all 4 corners of
the freezer are resting rmly on a solid oor.
Turn the leveling legs clockwise to retract the
legs and counterclockwise to extend the legs.
Ensure the oor is strong enough to support a
fully loaded freezer.
Loading ...
Loading ...
Loading ...