Loading ...
Loading ...
Loading ...
User instructions
29
6. Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT
DESCRIPTION
E1
Aquastop failure
The anti-flooding system has activated (relevant
models only). The system trips in case of water
leaks. Contact the after-sales service.
E2
Safety level
The system which limits the water level inside
the dishwasher has tripped. Interrupt the
program and switch off the dishwasher. Switch
the dishwasher back on, program it again and
start the wash cycle. If the problem persists,
contact the after-sales service.
E3
Water heating malfunction
Water heating is not operating or operating
incorrectly. Repeat the wash program; if the
problem persists, contact the after-sales service.
E4
Water temperature monitoring malfunction
Interrupt the program and switch off the
dishwasher. Switch the dishwasher back on,
program it again and start the wash cycle. If the
problem persists, contact the after-sales service.
E5
Water intake malfunction
The appliance is not taking in water or is not
doing so correctly. Check that the water
connections are correct, the water supply tap is
turned on and the filter is not clogged. If the
problem persists, contact the after-sales service.
E6
Water pump-out malfunction
The appliance is not pumping out the water or is
not doing so correctly. Check that the drain hose
is not kinked or crushed and that the trap or
filters are not clogged. If the problem persists,
contact the after-sales service.
Loading ...
Loading ...