Loading ...
Loading ...
Loading ...
7
ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.
Failure to follow these instructions can result in death, fire or electrical shock.
Before you move your refrigerator-freezer into its final location, it is important to
make sure you have the proper electrical connection.
Recommended Earthing Method
AC115Volt /60Hz, AC only 10 ampere fused and properly earthed electrical
supply is required. It is recommended that a separate circuit serving only this
appliance be provided. Use a receptacle which cannot be turned off with a switch
or pull chain. Do not use an extension cord.
NOTE: Before performing any type of installation, disconnect the
refrigerator-freezer from the electrical source. When you are finished, connect the
refrigerator-freezer to the electrical source and reset the control to the desired
setting.
LEVELING
If the refrigerator-freezer is not leveled during installation. The doors may not
close or seal properly, causing cooling, frost, or moisture problems. It is very
important of the refrigerator-freezer to be level in order to function properly.
To level your refrigerator-freezer you may either turn the adjustable foot clockwise
to raise that side to the refrigerator-freezer or turn counter – clockwise to lower
that side.
Loading ...
Loading ...
Loading ...