Loading ...
Loading ...
Loading ...
OPERATING OVER OBSTACLES
Improperly operating over obstacles could cause loss of control or rollover.
Before operating in a new area, check for obstacles. Avoid operating over large
obstacles such as large rocks and fallen trees. Always follow the proper
procedures outlined in this manual when operating over obstacles. See the New
Operator Driving Procedures section for details.
SKIDDING OR SLIDING
Failure to use extra caution when operating on
excessively rough, slippery or loose terrain could
cause loss of traction, loss of control, accident or
rollover. Do not operate on excessively slippery
surfaces. Always slow down and use additional
caution when operating on slippery surfaces.
Skidding or sliding due to loss of traction can cause loss of control or rollover (if
tires regain traction unexpectedly). Always follow proper procedures for
operating on slippery surfaces as described in this owner's manual. See the
New Operator Driving Procedures section for details.
OPERATING A DAMAGED VEHICLE
CAUTION
Operating a damaged vehicle can result in an accident. After any rollover or
other accident, have a qualified service dealer inspect the entire machine for
possible damage, including (but not limited to) seat belts, rollover protection
devices, brakes, throttle, and steering systems.
OPERATING THROUGH WATER
Operating through deep or fast-flowing water can cause loss of traction, loss of
control, rollover or accident. Never operate in fast-flowing water or in water that
exceeds the floor level of the vehicle.
Always follow proper procedures for operating in water as described in this
owner’s manual. See page 64.
Wet brakes may have reduced stopping ability. After leaving water, test the
brakes. Apply them lightly several times while driving slowly. The friction will help
dry out the pads.
19
SAFETY
Loading ...
Loading ...
Loading ...