Loading ...
Loading ...
Loading ...
301
Technical Notes
12
For Your Safety
■
■
Charging the Battery
Charging the Battery
Charge the battery in the supplied battery char-
ger. Charging times will increase at ambient tem-
peratures below +10 °C (+50 °F) or above +35 °C
(+95 °F). Do not attempt to charge the battery at
temperatures above 40 °C (+104 °F); at temperatures
below 0 °C (+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged bat-
tery. The battery does not however need to be
fully discharged before charging.
The battery may be warm to the touch immedi-
ately after charging or use. This is normal.
■
■
Battery Life
Battery Life
At normal temperatures, the battery can be re-
charged about 300 times. A noticeable decrease
in the length of time the battery will hold a
charge indicates that it has reached the end of its
service life and should be replaced.
■
■
Storage
Storage
Performance may be impaired if the battery is left
unused for extended periods when fully charged.
Run the battery fl at before storing it.
If the camera will not be used for an extended pe-
riod, remove the battery and store it in a dry place
with an ambient temperature of from +15 °C to
+25 °C (+59 °F to +77 °F). Do not store in loca-
tions exposed to extremes of temperature.
■
■
Cautions: Handling the Battery
Cautions: Handling the Battery
•
Do not transport or store with metal objects
such as necklaces or hairpins.
•
Do not expose to fl ame or heat.
•
Do not disassemble or modify.
•
Use with designated chargers only.
•
Dispose of used batteries promptly.
•
Do not drop or subject to strong physical shocks.
•
Do not expose to water.
•
Keep the terminals clean.
•
The battery and camera body may become warm
to the touch after extended use. This is normal.
■
■
Disposal
Disposal
Dispose of used batteries in accord with local
regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
Use only FUJIFILM AC power adapters designated
for use with this camera. Other adapters could
damage the camera.
•
The AC power adapter is for indoor use only.
•
Be sure the DC plug is securely connected to
the camera.
•
Turn the camera off before disconnecting the
adapter. Disconnect the adapter by the plug,
not the cable.
•
Do not use with other devices.
•
Do not disassemble.
•
Do not expose to high heat and humidity.
•
Do not subject to strong physical shocks.
•
The adapter may hum or become hot to the
touch during use. This is normal.
•
If the adapter causes radio interference, reorient
or relocate the receiving antenna.
Loading ...
Loading ...
Loading ...