Loading ...
Loading ...
Loading ...
3. Close the oven door halfway to the first
opening position. Then lift and pull forward and
remove the door from its seat.
4. Put the door on a soft cloth on a stable surface.
5. Hold the door trim (B) on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
2
B
6. Pull the door trim to the front to remove it.
7. Hold the door glass panels by their top edge
and carefully pull them out one by one. Start
from the top panel. Make sure the glass slides
out of the supports completely.
8. Clean the glass panels with water and soap.
Dry the glass panels carefully. Do not clean the
glass panels in the dishwasher.
When the cleaning is completed, install the glass
panels and the oven door.
Make sure that you put the glass panels (A and B)
back in the correct sequence. Check for the
symbol / printing on the side of the glass panel,
each of the glass panels looks different to make the
disassembly and assembly easier.
When installed correctly the door trim clicks.
A B
Make sure that you install the middle panel of glass
in the seats correctly.
A
B
REPLACING THE LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
24
Loading ...
Loading ...
Loading ...