Loading ...
Loading ...
Loading ...
49-60433-6 9
Controls and Features
Fresh-Food Refrigerator
Glass
shelves
Tempered glass shelves in the fresh-food
refrigerator are removable for easy cleaning
or for storing larger items.
To remove a shelf, open the door completely
to avoid potential damage to the gasket. Lift
up on the back of the shelf slightly. Tilt the
shelf to one side at an angle while pulling
forward.
Appearance may vary
To replace a shelf, open the door completely
to avoid potential damage to the gasket.
Tilt the shelf to one side at an angle and
slide toward the back wall, placing one side
onto the shelf support. Place the other side
onto the opposite shelf support. Ensure rear
locking tabs are engaged. When installed
properly, the shelf will not slide forward when
gently pulled.
To remove, lift up on the back of
the shelf
Tilt the shelf at an angle while
removing or replacing
Place in slots when replacing the
shelf
QuickSpace
™
shelf
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
Step 1: Lift the back edge of the front half of
the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of the front half
of the shelf while sliding it underneath the
back half.
The entire Quick Space shelf can be removed
and replaced (see Glass Shelves section).
Step 3
Step 1
Step 2
Loading
tips and
suggestions
Do not block the thermistor, located
on the right hand side, just above the third
shelf of the fresh-food refrigerator. Blocking
the thermistor could impair the air circulation
and temperature control.
Loading ...
Loading ...
Loading ...