Loading ...
Loading ...
Loading ...
Any other servicing should be done by an authorized service representative. If appliance is not
working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it
to a service center prior to continuing use.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Vacuum
won’t run
1. Power cord not firmly
plugged into outlet.
1. Plug unit in firmly.
2. No voltage in wall plug. 2. Check fuse or breaker in home.
3. Blown fuse or tripped
breaker.
3. Replace fuse/reset breaker in home.
4. Thermal Protector activated. 4. Unplug and allow vacuum to cool for 30min.
(This willl reset the thermal protector)
Dust escaping
from vacuum
1. Dirt cup full. 1. Empty dirt cup.
2. Dirt cup not installed
correctly.
2. Review Dirt Cup removal & replacement.
3. Hose not installed correctly. 3. Review Hose installation.
Smoky/burning
smell detected
1. Brush roll is clogged. 1. Clear/remove debris from brush roll.
Vacuum tools
won’t pick-up
1. Hose clogged 1. Remove hose and tools; remove obstruction.
2. Dirt cup full 2. Empty dirt cup.
3. One or both filters are
clogged.
3. Remove both filters and clean.
4. Release handle/wand to
actuate internal valve.
4. Pull handle up and out of unit.
5. Vacuum not picking
up debris.
5. Brush roll could be turned off or the belt
could be broken.
To reduce the risk of personal injury - Unplug before cleaning or servicing.
WARNING
NOTE: Any other servicing should be done by an authorized service representative. If appliance
is not working as it should, has been dropped, damaged, left outdoors or dropped into water,
take it to a service center prior to continuing use.
714
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...