Loading ...
Loading ...
Loading ...
9
Cleaning the metal grease filter
These instructions apply to several appliance models. It
is possible that individual features are described that do
not apply to your appliance.
9 WARNING
RISK OF FIRE
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months
or as frequently as necessary.
Never operate the appliance without the grease
filter.
Notes
Do not use any aggressive, acidic or alkaline cleaning
agents.
When cleaning the metal grease filters, also clean the
metal grease filter holder in the appliance with a moist
cloth.
You can clean the metal grease filters in a dishwasher
or by hand.
By hand:
Note: You can use a special grease solvent if soiling is
stubborn. You can order it via the online shop.
Soak the metal grease filters in hot soapy solution.
Use a brush for cleaning and then rinse the filters well.
Allow the metal grease filters to drip dry.
In the dishwasher:
Note: Slight discoloration is possible when cleaning the
grease filters in the dishwasher. This does not affect the
metal grease filter's functioning.
Do not clean extremely dirty metal grease filters with
dishes.
Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
Uninstalling metal grease filter
1.
Open the latch and fold down the metal grease filter.
Simultaneously use your other hand to grasp under
the metal grease filter.
2.
Remove the metal grease filter from its mounting.
Notes
Grease can gather in the bottom of the metal
grease filter.
Hold metal grease filter horizontally to prevent
grease from dripping.
3.
Clean metal grease filter.
Installing metal grease filter
1.
Insert metal grease filter.
Simultaneously use your other hand to grasp under
the metal grease filter.
2.
Flip metal grease filter up and snap the latch into
place.
Troubleshooting
You can often easily eliminate problems that may occur
on your own. Before calling customer service, take into
account the following information.
9 WARNING
RISK OF ELECTRIC SHOCK
Improper repairs are dangerous. Only an
authorized servicer may perform repairs and
may replace damaged connecting leads.
Remove the fuse or deactivate the breaker in the
fuse box or breaker box if the appliance is
damaged. Call an authorized servicer.
--------
Disruption Possible
cause
Solution
Appliance is
not working
Power outage Check whether other
kitchen appliances are
working
Tripped
Circuit
Breaker
Check the circuit breaker
in the service panel to
make sure the appliance
is in working order.
Lighting not
working
Bulbs burnt
out
Replace bulbs, see
chapter "Replace Bulbs"
9 WARNING
To reduce the risk of fire and shock use only the
approved recirculating kit and active carbon filter
approved for the installation.
Loading ...
Loading ...
Loading ...