Loading ...
Loading ...
Loading ...
70
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Check and l ubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 66. Items not listed in
the chart should be lubricated at the General Lubrication interval.
NOTE: The a-arms and lower control arms are lubricated at the
factory, and no additional lubrication will be needed.
However , if these components are subjected to severe use,
grease zerks have been provided for additional lubrication at
the user’s discretion.
Lubrication Chart Key
" More often under severe use, such as wet or dusty conditions.
L Polaris Premium All Season Grease or grease conforming to NLG
No. 2, such as Conoco Superlube M or Mobilegrease Special.
F Use Polaris Premium U-Joint Lube every 500 miles, before long
periods of storage, or after pressure washing or submerging.
Item Lube Method
Engine Oil Premium 4 Synthetic 0W40 See page 72.
Brakes DOT 3 fluid only See page 35.
(1) Transmission Premium AGL Synthetic
Gearcase Lube
See page 75.
(2) Front Demand Drive
Unit (Front Gearcase)
Premium Demand Drive
Hub Fluid
See page 76.
(3) Rear Gearcase Premium ATV Angle Drive
Fluid
See page 77.
(4) Rear Prop Shaft FGrease Grease fitting (3 pumps
maximum).
(5) Front Prop Shaft Yoke FGrease Grease fitting (3 pumps
maximum).
(6) Ball Joint
"LGrease
Locate fitting on back side of
struts and grease with
grease gun.
Loading ...
Loading ...
Loading ...