Loading ...
Loading ...
Loading ...
NOTE: The vehicle should start charging automati-
cally. If not, please check the following:
• Charging Cordset - The charging cordset status
indicators illuminate green or red to identify the
charging cordset status. Refer to “Troubleshooting
Using The Status Indicator Display” in this section
for further information on the charging cordset
status.
• Wall Receptacle – Check whether the wall recep-
tacle is functional (no power outage) and/or plug
the charging cordset into a different wall receptacle.
• Charging Schedule – Check whether or not the
charging schedules have been enabled. If enabled,
check that you are within the scheduled time and
date. If a charging schedule has been enabled and
you are outside the time and date, you may over-
ride the schedule for this charging event by plug-
ging in the charge connector, unplugging it, and
then plugging it back into the vehicle charge inlet.
Complete the double plug sequence within 10
seconds for it to override the set schedule.
5. To stop the charging process, disconnect the vehicle
side connector first and then the charging cordset
from the wall receptacle. To disengage the vehicle
coupler, push the button on the charge connector
before removing the connector from the vehicle
charge inlet.
6. Close the inlet door.
NOTE: It is good practice to keep the ignition in the
OFF position while conducting Level 1 Charging. This
minimizes any additional vehicle loads the EVSE has to
support which extend the charging time.
Removing The Charge Connector From The Vehicle
Charge Inlet
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19
Loading ...
Loading ...
Loading ...