Loading ...
Loading ...
Loading ...
VIZIO M420VT User Manual
Chapter 5 Using your HDTV for the first time
When pressing the MENU or OK button, your HDTV displays the following OSD main menu.
Watching a TV Program
Before you start watching TV, please make sure that any cable, satellite or
off-air antenna connections are secure. Also, verify that the AC power
cord is plugged into a correctly grounded electrical outlet or surge
protector.
1. Press the power button on the remote control.
2. Select the input to which your device is connected that provides
TV programming (e.g. TV, HDMI, COMP).
Note: You should be able to see a picture. If you do not, make sure that
all of your HDTV connections are secure and you have selected the
correct video input source. Each press of the INPUT button on the remote
control will cycle through the available inputs. Press the button until the
input associated with the device you want to view is shown.
3. When using the TV input, press the channel buttons on the remote control or the CH ▲ or ▼
buttons to change the channel.
Note: The Channel buttons and on the remote control will not work if you are watching a program using
HDMI, Component, or AV ( Composite video) inputs.
Select Input Source
Select the input source for your HDTV by pressing the INPUT button
on the remote control or the side of your TV. Pressing this button will
cycle you through the following options: DTV/TV, AV, COMPONENT,
HDMI1, HDMI2, HDMI3, HDMI4, RGB, and MULTIMEDIA.
Turn on your device and you will see a picture on your HDTV. If there
is no picture, make sure you have selected the correct input on your
HDTV.
Note: If the selected device is RF connected, your HDTV needs to be
in TV mode and on either channel 3 or channel 4 matching the
channel which has been selected on the back of the VCR, Cable Box,
External TV Tuner or Satellite Receiver. Please refer to the User’s
Manual of the respective equipment for details.
28
www.VIZIO.com
Loading ...
Loading ...
Loading ...