Loading ...
Loading ...
Loading ...
Mode Functions
Burst (B) releases individual bursts twice per second. Pulse
width is adjustable and the pulse rate is set at 100Hz per
second.
Continuous (C) stimulation is delivered continuously at the
settings determined by intensity, rate, and width knobs.
Modulation (M) pulse width decreases from its setting by 60%
and maintains the decreased width for 2 seconds before return-
ing to the original width setting, which is maintained for 3.5
seconds. The cycle is then repeated. The intensity and pulse
rate are adjustable.
ATTACHING THE LEAD WIRES
The lead wires provided with the TENS device insert into the
jack sockets located on top of the unit. Holding the insulated
portion of the connector, push the plug end of the wire into one
of the jacks; one or two sets of the wires may be used. After
connecting the wires to the stimulator, attach each wire to an
electrode.
Lead wires provided with the TENS device are compliant with
mandatory compliance standards set forth by FDA.
NOTE: Use care when you plug and unplug the wires. Pulling on
the lead wire instead of its insulated connector may cause wire
breakage.
CAUTION: Never insert the plug of the lead wire into an AC power
supply socket.
ELECTRODE SELECTION AND CARE
Your physician/clinician should decide which type of electrode is
best for your condition.
Follow application procedures outlined in electrode packaging to
maintain stimulation and prevent skin irritation. The electrode
packaging will provide instructions for care, maintenance and
proper storage of your electrodes.
05
Loading ...
Loading ...
Loading ...