Loading ...
Loading ...
Loading ...
6
www.electrolux.com
4. CONTROLS
Button Function Led
A
Turns the lighting system on and o at maximum intensity. On/O
Press and hold for approximately 2 seconds to turn
the lighting system on and o in Courtesy Light mode.
On/O
B
Turns the motor on at the speed one or turns the motor o. On/O
Press and hold for approximately 5 seconds to Lock
/ Unlock the Keyboard, for example in order to clean
the surface.
All the Leds Flash - Keyboard Locked.
All the Leds Flash - Keyboard Unlocked.
While it is Locked the Leds light up one at a
time in cycle.
C
Turns the Motor on at Speed one. On/O
D
Turns the Motor on at Speed two. On/O
E
Turns the Motor on at Speed three. On/O
F
Turns the Motor on at Maximum Speed. This speed is
timed to run for 6 minutes. At the end of this time the
system will automatically return to the speed set before.
Suitable to deal with maximum levels of cooking fumes.
On/O
G
Delay function
Activates/Deactivates automatic switch-o with a 15
minutes delay. Suitable to complete elimination of residual
odours. Can be activated from any position. It cannot be
activated if the Intensive function is in use.
On/O
Press and hold the button for approximately 5 seconds,
with all the loads turned o (Motor and Lights), to turn
the Remote control on/o.
Buttons B LED + C LED (Flashes twice) - Remote
control Activated.
Buttons B LED + C LED (Flashes once) - Remote
control Deactivated.
H
When the lters alarm is triggered, the alarm can be
reset by pressing this button.
These indications are only visible when the motor is
turned o.
The Button LED ashes three times.
When the procedure terminates, the indication
shown previously turns o:
Button H lights up, indicating the need to wash the
metal grease lters. The alarm is triggered after the
Hood has been in operation for 100 working hours.
Button H ashes, indicating the need to change
the activated charcoal lters, and also to wash the
metal grease lters. The alarm is triggered after the
Hood has been in operation for 200 working hours.
Press and hold the button for approximately 5 seconds,
with all the loads turned o (Motor and Lights), to turn
the Activated Charcoal Filter alarm on/o.
All the Leds (Flash twice)-Alarm Activated.
All the Leds ((Flash once)-Alarm Deactivated.
Warning: In order to activate the function press on the symbol
Loading ...
Loading ...
Loading ...