Loading ...
Loading ...
Loading ...
25
7. Troubleshooting & FAQs
Ans.:
Yes, you can change your color
setting through OSD control as
the following procedures,
• Press “OK” to show the OSD (On
Screen Display) menu
• Press “Down Arrow” to select the
option “Color” then press “OK” to
enter color setting, there are three
settings as below.
1.
Color Temperature: The six
settings are 5000K, 6500K,
7500K, 8200K, 9300K and
11500K. With settings in the
5000K range the panel appears
"warm, with a red-white
color tone", while a 11500K
temperature yields "cool,
bluewhite toning".
2.
sRGB: This is a standard setting
for ensuring correct exchange of
colors between different device
(e.g. digital cameras, monitors,
printers, scanners, etc).
3.
User Define: The user can choose
his/her preference color setting
by adjusting red, green blue
color.
Note
A measurement of the color of light
radiated by an object while it is being
heated. This measurement is expressed
in terms of absolute scale, (degrees
Kelvin). Lower Kevin temperatures such
as 2004K are red; higher temperatures
such as 9300K are blue. Neutral
temperature is white, at 6504K.
Q9:
Can I connect my LCD monitor to
any PC, workstation or Mac?
Ans.:
Yes. All Philips LCD monitors are
fully compatible with standard
PCs, Macs and workstations.
You may need a cable adapter
to connect the monitor to your
Mac system. Please contact your
Philips sales representative for
more information.
Q10:
Are Philips LCD monitors Plug-
and- Play?
Ans.:
Yes, the monitors are Plug-and-
Play compatible with Windows
7/8/8.1/10, Mac OSX.
Q11:
What is Image Sticking, or Image
Burn-in, or After Image, or Ghost
Image in LCD panels?
Ans.:
Uninterrupted display of still or
static images over an extended
period may cause "burn in", also
known as "after-imaging" or
"ghost imaging", on your screen.
"Burn-in", "after-imaging", or
"ghost imaging" is a well-known
phenomenon in LCD panel
technology. In most cases, the
"burned in" or "atter-imaging"
or "ghost imaging" will disappear
gradually over a period of
time after the power has been
switched off.
Always activate a moving screen
saver program when you leave
your monitor unattended.
Always activate a periodic screen
refresh application if your LCD
monitor will display unchanging
static content.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
image” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
Loading ...
Loading ...