IK007 Installation manual

Installation manual - Page 13

For IK007. Also, The document are for others Westinghouse models: STM3900, STM4200, SBM3800, SBM4300, WTM2800, WTM3000, WTM3300, WTM3900, WTM4200, WTM4400, WTM5200, WTE4200, WTE5200, WTB2300, WTB2500, WTB2800, WTB3400, WTB3700, WBM3700, WBM3800, WBM4000, WBM4300, WBM5100, WBE4300, WBE5100, WRM3700, WRM4300, WFM3000, WFM3600, KTM2800, KTM3000, KTM3300, KTM3600, KTM3900, KTM4200, KTM4400, KTM5200, KBM3800, KBM4300, KBM5100, WBB3400, WBB3700

Loading ...

SECURING THE REFRIGERATOR IN THE

CUPBOARD

4. Slowly close the cupboard door (pushing the

refrigerator back) until it is slightly ajar, i.e. with a gap

of about 4mm (Figure 11).

You may have to reposition the refrigerator back or forward

until the 4mm gap is obtained. Ensure that the refrigerator

remains parallel as you do this. Once you have the correct

gap, proceed to the next step.

4mm hinge gap

Figure 11

NOTE: The gap is left to ensure the refrigerator door will be

allowed to close fully for a good gasket seal.

NOTE: When attaching all screws to cupboard, ﬁrst drill

a 2mm pilot hole in the correct position. This will allow

easy hand insertion of self tapping screw.

Now that the refrigerator is correctly positioned:

1. Screw in top hinge bracket to the cupboard wall using

4 cupboard screws provided. This will secure the top

of the refrigerator (Figure 12).

2. Screw down foot bracket to cupboard ﬂoor with 2

cupboard screws. This will secure the bottom of the

refrigerator (Figure 13. Figure 13a for selected

models only).

Fridge

Figure 12

Figure 13

For WTB2300 & WTB2500

Figure 13a

Loading ...