Loading ...
Loading ...
Loading ...
Typical
Under Counter Installation of an Electric Built-in
Oven with a Cooktop Mounted Above
All mounting
hardware must
be used to secure
the built-in oven
to the cabinets.
Refer to the built-in
oven installation
instructions.
208/240 Volt grounded junction
box for built-in oven.
Junction box must
be located approx.
3" to the left of
the built-in oven
cutout.
This cooktop may be
installed over certain
built-in electric oven
models.
Side filler panels are necessaryto
isolate the unit from adjoining
cabinets. Panel height should allow
for installation of approved cooktop
models. See "Typical GasCooktop
Installation Over an Electric Built-in
Oven Installed Under the Counter"
on previous page.
32" Min.**
(81.3 cm)
36"
(91.4 cm)
Use 3/4" (1.9 cm) plywood, installed on
two runners, flush with toe plate. Must
be capable of supporting 150 Ibs.
Cut an opening in wood base minimum
9" (22.9 cm) x 9" (22.9 cm), 2" (5.1 cm)
from left side filler panel, to route armored
cable to junction box.
4 1/2" (1 1.4 cm)
Max.*
* If no cooktop is installed directly over the oven unit, 5" (12.7 cm) maximum isallowed.
** 32" (81.3 cm) min. from top of cabinet to top of runners must be maintained.
30" (76.2cm) 271/4"(69.2cm) 28 s/8"(72.7cm) 281/2"(72.4cm) 29" (73.7cm) 231/2"(59.7cm)
27" (68.6cm) 271/4'' (69.2cm) 28 s/8" (72.7cm) 24 7/8" (63.1cm) 251/4'' (64.1cm) 231/2'' (59.7cm)
Loading ...
Loading ...
Loading ...