Loading ...
Loading ...
Loading ...
CLm:A gNG
Be sure that the controls are turned off and that the unit
is cool.
Control Knobs: Knobs can be removed for easier
cleaning. Pullstraight offthestem Washwithdetergent,
warm water and a soft cloth. Do not scour° When re-
installing, be sure to push knob down on the stem.
Burner Grates and Burner Top: Clean after each
spillover. O|sassemble as shown below. Wash with at(-
purpose, non-abrasive cleaner and warm water. Soak
stubborn soil. Rinse and dry completely° Reassemble
as explained in the installation section_
Glass Surface: Wipe surface clean after each use. If
additional cleaning is needed to eliminate spotting,
wash with equal parts white vinegar and warm water,
Rinse well and dry.
lln cases of burned on spi!llover:
• Remove excess soil with scraper (single edged razor).
• Scrubcooktopwithali-purposenon-abrasivecteaner
We recommend Sears Cooktop Cleaning Creme,_
(Stock No. 40079, available at Sears, Roebuck & Coo)_
= NEVER USE ABRASIVE SCOURING PADS OR
POWDERS ON COO_TOP, Plastic mesh pads such
as Dobte® may be used.
The eJectrode of _he spark igniter is
exposed, When cleaning the burner
bowt, be careful not to snag the elec-
trode of the spark igniter with your
c_eaning cloth, Damage to the igniter
could occur, Be careful not to turn on
any cooktop controls while cleaning
burner bowls. A slight electrical shock
might resuRt which could cause you to
knock over hot cookware,
BURNER GRATE
BURNERTOP
BURNER BODY
SPARK
IGNITER BURNER BOWL
BEFORE CAtLLIiNG FOR SERVUCE
To eliminate unnecessary service calls, read all the
instructions in this manual carefully. Then, if you have
a problem, check the table below. If you still have
trouble with your unit call your nearest Sears store or
service center for help, When calling, have this manual
handy with the model number, serial number and pur-
chase date filled in on the front cover.
PROBLEM SOLUTIOH
Cooktop knobs will not Push knobs in to turn.
turn
Cooktop burners will
not light
Gas supply not connected
or not turned on.
Counter unit not properly
grounded or polarized.
This can affect spark ignF
tion, See installation sec-
tion,
Noelectricitytounit; check
for tripped fuse or circuit
breaker.
Soil clogging holes in
burner body, Clean holes.
Cooktop burner top not re-
placed correctly. See in-
stallation section,
Knob not re-installed cor-
rectly. Push knob down
on the stem.
6 NGCUS05ol
Loading ...