Loading ...
Loading ...
Loading ...
9
Accessories
The following accessories are available to use with the Explorian model and other Vitamix Legacy blenders.
1. Personal Cup and Adapter
2. Tamper Holder
3. Blade Scraper
ap p e n d i x 1 - acceSS o r i e S
Tamper Holder use and care insTrucTions
Note: When properly installed, the tamper holder
will not interfere with blender operation. The
tamper holder can be installed on the left or right
side of the motor base.
1. Clean the parts by hand with warm, soapy
water or in the top rack in the dishwasher
before assembling.
2. Choose a side of the motor base to install the
tamper holder.
3. Lift up the blender base. Put the tamper
holder base onto the blender frame. Lower the
blender base back onto the work surface or
counter. Put the tamper holder cup onto the
tamper holder base. Twist the tamper holder
cup clockwise to lock into place.
4. Make sure the blender is sitting flat and steady
(no rocking side to side) before blending.
When installed properly, the inside flat surface
of the tamper holder cup will sit flush with the
side of the blender (See photo).
5. Remove the tamper holder from the blender
regularly to clean. To remove the tamper
holder cup, rotate the cup counter-clockwise.
Blade scraper use and care insTrucTions
1. Clean the parts by hand with warm, soapy water or in the top rack in the dishwasher before use.
2. Use the blade scraper to remove thick ingredients like jam and peanut butter from under the blades only after the container
has been removed from the motor base.
Keep hands and utensils out of container while blending to reduce the risk
of severe injury to persons or damage to the blender. A rubber scraper,
spatula or blade scraper may be used, but only when the blender is not
running and after the container has been removed from the motor base.
Do not leave foreign objects, such as spoons, forks, knives, scrapers,
spatulas or the lid plug, in the container as this will damage the blades and
other components when starting the blender and may cause injury
.
IMPORTANT!
Proper installation
(flush against motor base)
6. To remove the base, lift up on the motor base and remove the tamper holder base.
Loading ...
Loading ...
Loading ...