User Manual LG 43UN7300AUD 43 inch Class 4K Smart UHD TV

• Owner's manual - (English)

Table of contents

• Preparing
• Optional Extras
• Wall Mounting Bracket
• Lifting and moving the TV
• Mounting on the Table
• Mounting to the Wall
• Connections
• Using Button
• Using Remote Control
• Using Magic Remote Control
• User Guide
• Troubleshooting
• Specifications

USER MANUAL TELEVISION

Preparing

• When the TV is turned on for the first time after being shipped from the factory, initialization of theTV may take approximately one minute.
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are using.
• New features may be added to thisTV in the future.
• The device must be easily accessed to a location outlet near the access.Some devices are not made by turning on /off button, turning off the device and unplugging the power cord
• The items supplied with your product may vary depending upon the model.
• Product specifications or contents of this manual maybe changed without prior notice due to upgrade of product functions.
• Foran optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39inches) thick and18 mm (0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the USB cableor USB flash drive does not fit into your TV’s USB port.
• Use a certifiedcable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur
• Recommended HDMI cable types (3 m (9.84 feet) or less)

- Ultra High-Speed HDMI cable®/TM

Optional Extras

• Optional extras can be changed or moifid for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain model
• The model name or design may be changed due tothe manufacturers circumstances or polices.

Wall Mounting Bracket

(Depending upon model)

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions forthe wall mount kits are described in. the following table.

Lifting and moving the TV

When moving oriftng the TV. read the following o prevent the TV from being scratched or damaged and for safe transportation regardless ofits type andsize.

• It is recommended to move the TV in the box or packing material that the TV originally came in
• Before moving o iting the T. disconnect the power cord and allables.
• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part. speaker. or speaker gril area

• Use atleast two people to move a largeTV.
• When transporting theTV by hand. hold the TV as shown inthe following illustration

• When transporting theTV. do not expose the TV t jolts or excessive vibration
• When transporting theTV. keep the TV upright; never turn the TV on its side or tt towards the left or right.
• When handling the TV. be careful nt to damage the protruding buttons.

Mounting on the Table

1. Lift and tit the TV intoits upright positon on a table.

Leave a minimum of 10 cm (4 inches) space from the wal for proper ventilation

2. Connect thepower cordtoa walloutlet.

Securing TV to the Wall

1. Insert and tighten the eye-bolts,or TV brackets and bolts on the back of theTV.

•  If there are bolts inserted at the eye-bolts position, remove the bolts first.

2. Mount the wall brackets with the bolts tothe wall. Match the location of the wall bracket and the eye-boltson the rear of the TV.

3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.

•  Use a platform or cabinet that is strong and large enough to support the TV securely.

•  Brackets,bolts and ropes are not provided.You can obtain additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that support the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building material. please contact qualified personnel to install the wall mount. Detailed instructions will be induded with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mounts easy to adjust orto connect the cables. When you do not use LG‛s wall mount bracket. use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to exteral devices. If you are using a non-adjustable mount. attach the mount to the wall. Attach the cables to the TV fist. then attach the TV to the mount.

•  When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects, (Depending upon model).

Connections

You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.

Antenna/Cable

Connect an antenna, cable,or cable box to watch TV while referring to the following.The illustrations may differ from the actual items and an RFcable is optional.

•  Make sure not to bend the copper wire of the RF cable.

•  Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

•  Use a signal splitter to use 2 TVs or more.

•  DTV Audio Supported Codec: MPEG, Dolby Digital

•  This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.

Other connections

Connect your TV to external devices.For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

HDMI

•  When connecting the HDMI cable, the product and external devices should be turned off and unplugged.

•  HDMI AudioSupported Format:

(Depending upon model)

True HD (48kHz),

Dolby Digital / Dolby DigitalPlus (32kHz /44.1kHz /48kHz),

PCM (32kHz /44.1kHz /48kHz /96kHz /192kHz)

• → →[Picture] → [AdditionalSettings] → [HDMI Ultra HD DeepColor]

(Except for UN85*,82UN80*)

- On:Support4K @ 50/60 Hz (4:4:4,4:2:2,4:2:0)

- Off:Support4K @ 50/60 Hz (4:2:0)

(Only UN85*,82UN80*)

- On:Support4K @ 50/60 Hz (4:4:4,4:2:2,4:2:0), <3,4port Only> 4K @ 100/120 Hz (4:4:4,4:2:2,4:2:0)

- Off:Support4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD DeepColor] setting to off.

- This feature is available only on certain models which support HDMI Ultra HD DeepColor.

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

•  If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

•  The external device connections shown may differ slightly from illustrations in a manual.

•  Connect external devices to the TV regardless about the order of the TV port.

•  IfyouconnectagamingdevicetotheTV, use the able supplied with the gaming device.

•  Refer to the external equipment’s manual for operating instructions.

•  In PC mode, there may be noise associated with the resolution, vertical pattern, contrast brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the[Picture] menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

•  Some USB Hubs may not work. If a USB device connected through a USB Hubis not detected, connect it directly to the USB port on the TV.

•  When connecting via a wired LAN, it is recommended to use a CAT 7 cable.

•  The TV may be capable of operating without a set-top-box from a multi channel video programming distributor (MVPD).

Using Button

Youcan simply operate the TV functions, using the button.

Basic functions

1. All running apps will close.
2. You can access and adjust the menu by pressing the button when TV is on.
3. You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on,press the button onetime. You can adjust the Menuitemsusingthebutton

Using Remote Control

(Depending upon model)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

Make sure to point the remote control toward the remote control sensor on the TV.

(Some buttons and services may not be provided depending upon models or regions.)

Using Magic Remote Control

(Depending upon model)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

When the message[Magic remote battery is low. Please change the battery.] is displayed, replace the batteries.

To install batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

(Some buttons and services may not be provided depending upon models or regions.)

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

1. Put batteries into the Magic Remote and turn the TV on.

2. Point the Magic RemoteatyourTV and press the Wheel (OK)on the remote control.

* If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the (BACK)and (HOME)buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

* Press and hold the button for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.

User Guide

For more information about this TV, read the USER GUIDE embedded in the product.

•  To open the USER GUIDE  → → [Support] → [User Guide]

Troubleshooting

Cannot control the TV with the remote control.

•  Checkifanythingsuch as tape has been placed over the receiver.

•  Check if there is any obstacle between the product and the remote control.

•  Replace the batteries with new fresh ones.

No image display and no sound is produced.

•  Check if the product is turned on.

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.

•  Check the power control settings. The power supply maybe interrupted.

•  Check if the auto-off function is activated in the settings menu.

•  If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Abnormal Display

•  If the TV feels cold to the touch, there may be small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on theTV’sperformance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effect on the screen.

•  This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

•  Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for extended length of time.

Generated Sound

•  Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

•  Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the test procedures for Television Sets (USA only).

The actual energy consumption depends on the usage environment (the content watched, TV settings, etc.).

•  For information of the power supply and power consumption, refer to the label attached to the product.

- The typical power consumption is measured in accordance with IEC62087oreach country’s energy regulations.

*  On some models, the label is inside the external device connection terminal cover.

*  Depending upon the model or country, the typical power consumption may not be on label.

(Depending upon country)

(Only82UN80*, UN85*)

(Except for UN69*, UN70*,82UN80*, UN85*)

(Only UN69*, UN70*)