Loading ...
Loading ...
Loading ...
5
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of
time during this process, it must be allowed to remain upright
for 6 hours before plugging it in to avoid damage to the internal
components.
1. Remove the hinge cover and the upper hinge. Remove the
hinge hole covers from the top left side of the cabinet. Remove
the freezer door from the cabinet.
2. Remove the screws from the center hinge. Remove the center
hinge, the center hinge spacer and the refrigerator door.
3. Move the bushing from the top right side to the top left side of
the refrigerator door.
4. Remove the right door stop from the bottom of the refrigerator
door.
5. Remove the lower hinge from the right side of the cabinet, then
install the lower hinge on the left side of the cabinet.
6. Get the left door stop from the accessory bag, install it on the
bottom left side of the refrigerator door.
7. Remove the center hinge screw hole plugs and install them in
the screw holes on the right side of the cabinet.
8. Install the refrigerator door. Install the center hinge. Ensure that
the center hinge spacer is installed with the center hinge as the
spacer is necessary to allow the doors to have full range of
motion. Get the left upper door stop from the accessory bag,
install it on the bottom left side of the freezer door.
9. Install the freezer door. Install the upper hinge and hinge cover
on the top left side of the cabinet. Before tightening the screws
on the upper hinge, ensure that the top of the door is level with
the cabinet and that the rubber gasket is making a good seal.
Install the screw hole covers on the top right side of the cabinet.
A. Hinge Cover
B. Screws
C. Upper Hinge
D. Hinge Hole Cover
E. Center Hinge Spacer
F. Center Hinge
G. Door Bushing
H. Right Door Stop
I. Lower Hinge
J. Left Door Stop
K. Screw Hole Cover
A
K
B
C
D
E
F
G
H
I
B
G
B
B
B
J
E
F
G
B
A
B
C
D
1
2
3
4
5
6
7
8
9
Loading ...
Loading ...
Loading ...