Loading ...
Loading ...
Loading ...
17
Preparation
AUDIO
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
Dolby Digital / MPEG
Bitstream – Select “Bitstream” if you connect this
DVD player’s DIGITAL OUT jack to an amplifier or
other equipment with a Dolby Digital or MPEG
decoder.
PCM (for Dolby Digital / MPEG) – Select when
connected to a two-channel digital stereo amplifi-
er. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of han-
dling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz.
Check the documentation for your amplifier to verify
its capabilities.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presen-
tation. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Vocal
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
LOCK (Parental Control)
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
1. Select “Rating” on the LOCK menu then
press B.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
Input a password and press OK. Enter it again and
press OK to verify. If you make a mistake before
pressing OK, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most restric-
tions and rating eight (8) is the least restrictive.
Unlock: If you select unlock, parental control is
not active and the disc plays in full.
4. Press OK to confirm your rating selection, then
press SETUP/MENU to exit the menu.
Password
You can enter or change password.
1. Select Password on the LOCK menu then press
B.
2. Follow step 2 as shown above (Rating).
To change the password, press OK when the
“Change” option is highlighted. Input a password
and press OK. Enter it again and press OK to
verify.
3. Press SETUP/MENU to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Press SETUP/MENU to display the Setup menu.
2. Input the 6-digit number “210499”. The password
is cleared.
AUDIO
Dolby Digital
PCM
48 kHz
Bitstream
MPEG
Sample Freq.
OnDRC
Move
Select
OffVocal
LOCK
Rating
New
US
Unlock
Password
Area
Move
Select
Loading ...
Loading ...
Loading ...