User Manual Frigidaire FFHP302SQ2 ductless split air conditioner

Room Air Conditioners, during operation, may make noise. It is normal to hear ‘high pitch chatter’ a sound of rushing air, gurgle/hiss, pinging or swishing and vibration. These are all normal.

For most air conditioners, the filter can be found by opening the front panel. Since it’s a reusable filter, you can simply remove and clean using warm, soapy water. After cleaning, allow the filter to dry thoroughly before replacing it. You may also vacuum the air filter to remove excess dirt and particles.

For all new ENERGY STAR products the EPA has regulated that all ENERGY STAR air conditioners must be factory set to Energy Saver (Econ) mode.
If you turn the room air conditioner off in cool mode, and restart the unit it will default back into Energy Saver mode.
You may select out of Energy Saver mode by selecting the mode button, however we recommend using the feature to help save energy.

Room Air Conditioners, during operation, may make noise. It is normal to hear ‘high pitch chatter’ a sound of rushing air, gurgle/hiss, pinging or swishing and vibration. These are all normal.

When this feature is on, the electronic air purifier is energized to remove pollen and impurities from the air. To cancel this feature, press the Clean Air button.

Proper air flow into the air conditioner is essential for performance and safe operation. Under no circumstances should you block or cover any exterior or interior vents of the unit.

If you plan to store the air conditioner during the winter, remove it carefully from the window according to the installation instructions. Cover it with plastic or return it to its original carton.
NOTE: To prevent rust or electrical connections from being damaged, store air conditioner in an upright position and a dry place.

For your safety all Frigidaire air conditioners feature a 3-prong grounding plug and current leakage detection device.
These enhanced plugs help to detect damages to the power cord and can be tested following a few simple steps.
1. Press the reset button
2. Plug the cord into the power outlet
3. Press the test button, the reset button should pop up
4. Press reset button for use
5. Do not use room air conditioner if above test fails.
For more information please consult your use and care manual.