Loading ...
Loading ...
Loading ...
Rinnai Australia 6 Operation Manual
IMPORTANT POINTS
It is recommended that a dedicated 240V 10 Amp power point be used with this appliance. DO NOT
use power boards or double adaptors to operate this appliance. Heater MUST NOT be located below a
power socket-outlet
DO NOT place containers of liquid on top of the heater. Water spillage can cause extensive damage to
the appliance and create an electrocution hazard.
.
Turn the heater OFF after use. DO NOT unplug the heater while it is in operation or while the fans are
still cycling. DO NOT move the heater while it is in operation or while the fans are still cycling.
Heat emanating from the front of this appliance may over time affect the appearance of some materials
used for flooring such as carpet, vinyl, cork or timber. This effect may be amplified if the air in the room
contains cooking vapours or cigarette smoke. To avoid this possibility, it is recommended that a mat be
placed in front of the appliance, extending at least 750 mm in front of it.
When the heater is operated for the first time or after long periods of non use a slight odour may be
emitted, this is normal. However if odours persist switch off the appliance and contact Rinnai.
During peak operating periods the filters should be cleaned weekly, however if the Filter warning
indicator illuminates, turn off the appliance immediately and clean filters before further use.
When the heater is unplugged the for an extended period the clock will stop and will
need to be reset. However programmed ON/OFF times will remain in the memory.
NOTE
ON
OFF
39
2
30
Loading ...
Loading ...
Loading ...