Loading ...
Loading ...
Loading ...
6
CYCLE STATUS LIGHTS INDICATOR
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds
or pauses that are different from traditional washers.
SENSING FILL
When the Start/Stop/Pause/Unlock Lid button is pressed,
the washer will ll with water and begin the wash cycle.
WASH
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle.
The wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briey (short hum) to move the basket
while lling.
FINAL SPIN/SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle.
CYCLE COMPLETE/DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED/LOCKED
To allow for higher spin speeds, the lid
will lock and the Lid Locked light will turn
on. When this light is lit, the lid is locked
and cannot be opened. When this light is
off, the lid is unlocked and can be opened.
If you need to open the lid, press
START/STOP/PAUSE/UNLOCK LID.
The lid will unlock once the washer
movement has stopped. This may
take several minutes if the load was
spinning at high speed. Press START/
STOP/PAUSE/UNLOCK LID again to
resume the cycle.
EXTRA RINSE (on some models)
This option can be used to automatically add a second rinse
to most cycles.
NOTE: To open the lid during the rinse or extra rinse phase
after the rst spin, you must rst press START/STOP/
PAUSE/UNLOCK LID to unlock the lid.
PRESOAK (on some models)
This option can be used to automatically add a presoak
time to a wash cycle. Items will gently tumble through the
detergent and water for the selected time to help loosen
tough stains.
7
6
Cycle Guide
For best fabric care, choose the cycle that best ts the load being washed. Not all cycles and options are available on all models.
Items to wash:
Cycle:
Temperature*:
Spin
Speed:
Cycle Details:
Sturdy fabrics,
colorfast items,
towels, jeans
Jeans Hot
Warm
Cool
Cold
Tap Cold
High Use this cycle for heavily soiled or sturdy items. This cycle
uses spray rinses only. Use this cycle for cleaning the
interior of the washer. See “Washer Care.”
Heavily soiled white
fabrics
Whites Hot
Warm
Cool
Cold
Tap Cold
High This cycle introduces liquid chlorine bleach to the load at
the proper time for improved whitening of your heavily soiled
white fabrics. This cycle combines high-speed wash action
and high-speed spin speed. For maximum soil and stain
removal, use the liquid chlorine bleach dispenser for liquid
chlorine bleach, color-safe bleach, or Oxi product laundry
boosters. This cycle can also be used for sturdy color
fabrics, such as towels, without liquid chlorine bleach.
Cotton heavy soiled
bright or darkly
colored items, linens,
casual, and mixed
loads
Deep Clean/
Heavy Wash
Hot
Warm
Cool
Cold
Tap Cold
High Provides maximum wash time and action for tough stains
and soils. Use this cycle for heavily soiled or sturdy items.
This cycle complies with SASO 2885 (standard cotton
program 40°C using Cold temperature and standard cotton
program 60°C using Hot temperature).
Large items such
as sheets, sleeping
bags, small
comforters, jackets,
small washable rugs
Bulky Items Hot
Warm
Cool
Cold
Tap Cold
Low Use this cycle to wash large items such as jackets and small
comforters. The washer will ll with enough water to wet
down the load before the wash portion of the cycle begins,
and uses a higher water level than other cycles.
*All rinses are cold.
8
Loading ...
Loading ...
Loading ...