Loading ...
Loading ...
Loading ...
en
8
Filling in the Salt
Open the screw-type cap of the
compartment
24 .
Warning
Before switching on the appliance for
the first time, pour approx. 1 litre of water
into the salt dispenser.
Then refill with salt (not cooking salt)
until the salt container is full
(max. 1.5 kg). When you refill the salt,
water is being displaced and drains off.
Refill with salt always just before switching
on the appliance in order to prevent
corrosion. As a result, any salt solution
which has run over will be immediately
diluted and flushed out.
Then clean the filling area of salt
residues and screw the compartment
lid back on without tilting the lid.
If the switch is set to ”0”, it is not necessary
to add any salt, as none is consumed
while the dishwasher is operating. If the
switch is set between ”1” and ”4”, then salt
must be added.
Warning
Do not pour detergent into the container
for special salt. This would destroy the
water softener.
LOW SALT indicator
Salt should be added as soon as the
coloured dot in the lid on the salt container
24 is no longer visible.
Depending on the washing frequency and
the hardness setting, the regeneration salt
may not have to be topped up for several
months.
Loading ...
Loading ...
Loading ...