User Manual - Page 80

For LINCOLN 2016 MKX.

Loading ...
Loading ...
Loading ...
You can operate the keypad with the
factory-set five-digit entry code. The code
is on the owner s wallet card in the glove box
and is available from an authorized dealer.
You can also program up to five of your own
five-digit personal entry codes.
Programming a Personal Entry Code
1. Enter the factory-set five-digit code.
2. Press 1·2 on the keypad within five
seconds.
3. Enter your personal five-digit code. You
must do this within five seconds of
completing step 2.
4. Press 1·2 on the keypad to save personal
code 1.
The doors lock then unlock to confirm that
programming was successful.
To program additional personal entry codes,
repeat steps 1 through 3, then for step 4:
Press 3·4 to save personal code 2.
Press 5·6 to save personal code 3.
Press 7·8 to save personal code 4.
Press 9·0 to save personal code 5.
For vehicles with MyLincoln Touch, you can
also program the system with a personal
entry code. See Settings (page 403).
Hints:
Do not set a code that uses five of the
same number.
Do not use five numbers in sequential
order.
The factory-set code works even if you
have set your own personal code.
Recalling Memory Positions (If Equipped)
The programmed entry codes recall driver
memory positions as follows:
Entry code 1 recalls driver 1 memory
positions.
Entry code 2 recalls driver 2 memory
positions.
Entry code 3 recalls driver 3 memory
positions.
Note: Personal entry codes 4 and 5 do not
recall memory positions.
Erasing a Personal Code
1. Enter the factory-set five-digit code.
2. Press and release 1·2 on the keypad
within five seconds.
3. Press and hold 1·2 for two seconds. You
must do this within five seconds of
completing Step 2.
All personal codes erase and only the
factory-set five-digit code works.
Anti-Scan Feature
The keypad goes into an anti-scan mode if
you enter the wrong code seven times. This
mode turns off the keypad for one minute
and the keypad lamp flashes.
The anti-scan feature turns off after:
One minute of keypad inactivity.
You press the unlock button on the
remote control.
You switch the ignition on.
You unlock your vehicle using intelligent
access.
77
MKX (CD9) Canada/United States of America, enUSA, ASO/OGC Review
Locks
Loading ...
Loading ...
Loading ...