Loading ...
Loading ...
Loading ...
Installation and connection en
13
AquaSensor
1
The AquaSensor is an optical meas-
uring device (light barrier) which
measures the turbidity of the washing
water. You can save water with the
AquaSensor.
Use of the AquaSensor depends on
the programme. If the soiling level is
low, the washing water is used in the
next wash cycle, so reducing water
consumption by 3-6 litres. If the soil-
ing level is is greater, the washing
water is drained off and replaced with
fresh water. In the automatic pro-
grammes the temperature and run-
ning time are additionally adjusted to
the level of soiling.
Installation and connection
Installation and connec-
tion
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.
Scope of supply
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note:The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Instruction manual
¡ Installation instructions
¡ Warranty
1
¡ Installation material
¡ Steam guard plate
1
¡ Rubber apron
1
¡ Mains cable
¡ Quick reference guide
1
Installing and connecting the ap-
pliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
1. Follow the safety instructions.
→Page4
2. Follow the instructions for electrical
connection. →Page14
3. Check the Scope of supply
→Page13 and the condition of
the appliance.
4. Consult the installation instructions
for the installation dimensions re-
quired.
5. Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
6. Install the drainage connection.
→Page14
7. Install the drinking water connec-
tion. →Page14
8. Connect the appliance to the elec-
tricity supply.
1
Depending on the appliance specifications
Loading ...
Loading ...
Loading ...