Loading ...
Loading ...
Loading ...
OMEGA ALTISE
CONTROLS
CONTROLS:
There are 4 control buttons on the control panel (top of tower fan body) and the remote control.
A) Power button: Once the power has been connected, press this button to start the tower
fan on low speed (the low (L) speed indicator will light up). Press again to turn off the fan.
B) Speed button: Once the fan is running (low), press the Speed button once to increase the
fan speed to medium. Pressing again will increase the speed to high, and once more will
return the fan speed to low. The set speed is indicated on the control panel display.
C) OSC button: Once the fan is running, pressing the OSC button will start the tower fan
oscillating (OSC indicator on control panel will light up). Press a second time to stop the
oscillation.
D) Timer button: A timer can be set for 0-7 hours (in 1 hour increments). Press this button to
cycle up from 1 to 7 and then back to 0 (selected timer option is displayed on the control
panel – add the times up to determine the full time). All other buttons continue to work
while the timer is in operation. To stop the timer function, set the time to 0. Once the time
has elapsed, the fan will turn off.
OPERATING THE TOWER FAN:
With the power cord plugged in, it is time to turn the tower fan on by pressing the power button once.
a) Choose a fan speed by pressing the speed button.
b) If required, turn on the oscillation with the OSC button.
c) If required, set up the timer by pressing the timer button (a sequence of 0-7 hours).
Turn the tower fan off by pressing the power button a second time.
CLEANING & MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE APPLIANCE IN WATER!
The fan should be cleaned periodically (at least once a month depending on the build-up of dust).
Clean the body of the tower fan with a soft damp cloth. Always make sure that the appliance is completely dry before
connecting back to the mains supply.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the tower fan. NEVER use
ALCOHOL OR SOLVENTS.
Open the rear cover and take out the mesh filter. Wash under water, rinse & dry. Replace filter & close rear cover.
Do not disassemble the fan in any other manner.
STORAGE: Store the tower fan with these instructions in the original packaging, in a cool, dry place.
It is important that you retain these instructions, proof of purchase as well as other important
documents about this product for future reference. Due to continual product development,
Omega Altise reserves the right to alter specifications or appearances without notice.
Dispose of packaging responsibly – recycle where facilities are available.
A division of Shriro Australia Pty Ltd
104 Vanessa St Kingsgrove NSW 2208
In Australia: 1300 795 572
In New Zealand: (09) 415 6000
www.omegaaltise.com
IM Ref: OT803RW 20/2014/06
CONTROL PANEL