Loading ...
Loading ...
Loading ...
Operation and handling requirements
121
Draining the bilge water from the hull
Remove the hull drain plug at the stern to
drain the water. Check the condition of the
O-ring on the hull drain plug, and then secure-
ly install the drain plug.
1 Hull drain plug
Draining the bilge water on water
This model is equipped with a self-draining
deck and bilge pump to drain the bilge water
on water.
Self-draining deck
Most water that enters the deck area drains
automatically out the stern through the large
drain hole in the deck.
A one-way check valve in the drain prevents
water from traveling back to the deck while
the boat is moored or moving in reverse.
Bilge pump (AR210 / SX210)
Your boat is equipped with a drainage system
that channels water that enters the boat from
the storage compartments to the bilge under
the engine compartment. When the bilge
pump switch is turned on, the bilge pump will
operate.
Even if the bilge pump switch is not turned on,
the bilge pump will detect when there is ex-
cessive water in the bilge and will automati-
cally drain most of it through the bilge pump
outlet. This function works automatically even
if the battery switch is turned to the off posi-
tion.
1
SportsBoat_F3R11.book Page 121 Thursday, September 20, 2018 5:43 PM
Loading ...
Loading ...
Loading ...