Loading ...
Loading ...
Loading ...
17
CLEANING THE NOZZLE
1 2 3
4 5 6
➊ Turn off the vacuum
cleaner and remove the
hand-held vacuum.
Press the hook to
release the brush
cover. Remove the
cover and set aside.
➍ Slide the brush back
through the belt inside the
vacuum nozzle.
➋ Lift the brush and
detach it from the drive
belt.
➎ Secure the brush into
the vacuum nozzle.
➏ Insert the front tabs on the
brush cover then press
down by the hooks until
the cover clicks into place.
➌
Remove any tangled hair
or threads from the brush.
-
Use another vacuum
cleaner to remove the hair
and threads from the brush.
- Use a pair of scissors
to cut the hair, threads
etc. that have collected
around the brush.
(Do not use water to
clean the brush.)
Hook
Tab
Brush*
Belt
Gear
Click
Click
Helpful tip
• After cleaning or replacement, follow instructions to replace
brush properly.
• Before vacuuming, check the nozzle wheels and brush for
foreign objects.
• Remove the objects to protect the floor surface.
* Brush type : Models vary
WARNING
Turn off vacuum cleaner and
remove hand-held vacuum
before servicing to avoid risk
of electric shock or injury.
Loading ...
Loading ...
Loading ...