Loading ...
Loading ...
Loading ...
9
INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps .
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
BULB REPLACEMENT
Important :
The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
Always switch off the electricity supply before
carrying out any operations on the appliance. When
handling bulb, make sure it is completely cool down
before any direct contact to hands.
When handling globes hold with a cloth or gloves to
ensure perspiration does not come in contact with
the globe as this can reduce the life of the globe.
LED LIGHTS:
Make sure the cooker hood is unplugged or turn OFF breaker.
Remove the grease filter,find out the internal lamp wire connector and terminal box,
then slowly pull out to proper place;(if the internal space is not big enough,you
need to dismantle the install plate or panel of the lamp.)
Prize up the terminal of the lamp wire connector with the aid of screwdriver.
Pull out the terminal base of the lamp wire connector.
Use a hand to press one side and then another side of the lamp back, apply proper
strength to press the lamp out of lamp hole,then slowly pull out the lamp wire
connector to replace the lamp.
Apply the reverse procedure to install the new lamp back.
• ILCOS D code for this lamp is: DSS-1.5/65-S-120/33
– LED modules –rectangle lamp
– Max wattage: 2x1.5 W
– Voltage range: DC 12V
– Dimensions:
Loading ...
Loading ...