Loading ...
Loading ...
Loading ...
Use
63
EN
Manual ignition:
1. Open the over door completely.
2. Press and turn the temperature knob anti-
clockwise to between the MIN and
MAX settings.
3. Insert a lit match inside the flame pipe A
on the oven base.
4. Check that ignition has occurred.
5. After lighting, keep the knob pressed in
for a few seconds to allow the
thermocouple to heat up.
Checking the power supply
Before manually lighting the gas oven
burner, you must check that the power
supply is present.
After connecting the appliance to the mains
power supply, perform one of the following
methods:
• Turn the timer knob to the lamp position
to switch on the oven light.
OR
1. Open the over door completely.
2. Press and turn the gas oven knob
anticlockwise to a position between
MIN and MAX.
3. Check that air comes out of the slots on
the rear of the hob.
Before performing manual ignition,
you must check the power supply
(see the “Checking the power
supply” section).
Loading ...
Loading ...
Loading ...