Loading ...
Loading ...
Loading ...
38
✓
MODEON/OFF
Ambilight
+
-
+
-
DVD/R CBL TV VCR AUX
PIPMENU
123
456
789
0
Ò
®
‡
π
º
†
®
®
®
®
A/CH
- FAVORITES -
FORMAT VIEW
INFO
SELECT GUIDE
DEMO CLOCK
MY CONTENT
VOL
CH/
PAGE
MUTE
AV+
-
POWER
SCREEN
=
_-
OK
.@
TUVPQRS WXYZ
JKLGHI MNO
ABC DEF
SWIVEL
POWER to switch to standby
º for pause,
® for record,
Ò for rewind (
VCR, CD);
search down (
DVD, AMP)
‡ for stop,
π for play,
† for fast forward (
VCR, CD);
search up (
DVD/AMP)
INFO display information
MENU to switch the menu on or off
- CH + for chapter, channel, track
selection
0 to 9 digit entry,
- tape index (
VCR),
select a DVD chapter,
select a frequency (
AMP)
cursor up/down
to select the next or the
previous disc (CD)
cursor left/right
to select the previous or
following track (
CD)
Expert mode
When you do not want the remote to go back to TV mode, and to stay in the
mode selected, proceed as follows:
& Select TV mode with the SELECT button.
é Press the SELECT button again simultaneously with the OK button for at
least 2 seconds.
“ Select the desired mode with the SELECT button.
The remote will not go back to TV mode from now on and will remain in the
mode selected.To go back to the default setting of the remote (TV mode)
repeat what is explained above, selecting the TV mode.
Note: LED behavior
- If the LED blinks
once after pressing the SELECT button simultaneously with the OK
button for at least 2 seconds, the remote control is in Expert mode and the remote
control remains in the mode selected.
- If the LED blinks
4 times after pressing the SELECT button with the OK button for
at least 2 seconds, the remote control is in
Normal mode and the remote control
returns to TV mode after 60 seconds.
Direct selection of a connected device
When the remote is in
TV Expert mode you may directly select a connected
device in the following way:
Press the
AV+ button:
-followed by digit ‘
1’ to select the device connected to AV1.
-followed by digit ‘
2’ to select the device connected to AV2.
-followed by digit ‘
3’ to select the device connected to AV3.
-followed by digit ‘
4’ to select the device connected to HDMI1.
-followed by digit ‘
5’ to select the device connected to HDMI2.
-followed by digit ‘
0’ to select the device connected to the side.
Note: Make sure your device is turned on.
Notes:
- If no action is being undertaken within 60 seconds, the remote control returns to TV
mode.
- After an action in the selected system mode, the remote control will remain in this
mode for 60 seconds and will then return to TV mode or press the
SELECT button to
return to TV mode immediately.
Most of the audio and video equipment from our range of products can be
operated with the remote control of your TV.
Normal mode
Press one of the buttons after you pressed the
SELECT button repeatedly
according to the equipment you want to operate with this remote control. See
Use of the remote control, p. 6.
Audio- and video equipment buttons
Loading ...
Loading ...
Loading ...