Loading ...
Loading ...
Loading ...
12
In/Out Cable Connection
To view images on the monitor that is not connected to the monitor docking port of MP700, you need to con-
nect the MP700 to the monitor via an RGB or DP Cable.
● RGB, DP(DisplayPort), LINE-OUT(Audio Port), and LAN cables are not included. You need to purchase
these separately, if needed.
● After cabling is complete, assign the SET ID of the monitor to be connected to MP700.
● To configure the SET ID, please refer to the owner’s manual for your monitor.
Attention
When using the SuperSign Manager software:
● The monitor's SET ID is a unique number used to identify the monitor. You can choose a number from 1
to 25. The SET ID allows the SuperSign Manager software to identify the monitor.
● In order to directly connect the monitor to the MP700, its SET ID must be set to 1.
● To use SuperSign Manager, the monitor that will be connected to a MP700 must support the LG RS232C
protocol. A monitor supporting the LG RS232C protocol can be controlled the monitor functions, such as
brightness and sound, using SuperSign Manager.
Note
DP to HDMI dongle product list
As the MP700 does not have an HDMI output port, the DP to HDMI converting dongle that supports HDMI
output should be used if HDMI output is required.
● LGE P/N: EAD63306301
Loading ...
Loading ...
Loading ...