Loading ...
Loading ...
Loading ...
28
EN
Delay End
You can set this function so that the appliance starts
automatically and finishes after a specified time
interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set a required
time.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Wi-Fi f
When WLAN is connected, the Wi-Fi icon on the
control panel is lit.
Add Item
You can use this option in order to add or remove
the laundry after the washing programme is started.
1
Press the Add Item button when the LED is
turned on.
2
Open the door after it unlocks itself.
3
Add or remove laundry.
4
Close the door and press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add laundry
at this time.
Temp.
You can use this option in order to select the
wash and rinse temperature in combination for the
selected programme. Press this button until the
desired setting is lit. Cold tap water is used for all
rinses.
• Select the water temperature suitable for
the type of load you are washing. Follow the
garment fabric care labels for best results.
Spin p
Spin speed level can be selected by pressing the
Spin button repeatedly.
1
Press the Power button.
2
Select a washing programme.
3
Press the Spin button to select spin speed.
4
Press the Start/Pause button.
NOTE
• When you select No, it will still rotate for a short
time to drain quickly.
Beep On/Off
This function operates only when the appliance is
in operation.
• Press and hold the Turbo Wash and Pre Wash
button simultaneously for 3 seconds to set the
this function.
Loading ...
Loading ...
Loading ...