Loading ...
Loading ...
Loading ...
Operating Instructions
OPERATING INSTRUCTIONS
There is a power bar mounted in the back of the unit, inside the compressor housing. The compressor
and coolant lines have been removed to make room for the power bar and electrical lines of the light
and fan. The light has a standard, three-prong power cord. The fan has a bulkier, square power cord.
Plug the fan into the power bar. The fan will run continuously to ensure your plants have an adequate
supply of fresh air.
Plug the timer into the power bar. See below for instructions on setting the timer.
Plug the light into the timer. The light will turn on and off based on the timer settings.
Note: Ensure the power bar is always plugged into a three-prong, grounded receptacle. Never at-
tempt to remove or disable the grounding prong on the plug of the power bar as this could result in
risk of fi re or electric shock.
Timer function
The timer can be used to create a regular light and dark cycle for your plants just as they would re-
ceive outdoors. The timer will turn the light on and off as required based on the settings you choose.
Keep in mind that different plants will grow best under different light cycle conditions; some need
more light and some need less. We recommend checking the seed packet for information on the best
light cycle to choose for your plants.
The circular face of the timer can be turned clockwise to set the current time. The current time is indi-
cated by aligning the arrow on the timer face with the corresponding hour of the day.
Based on the type of plants you are growing, decide at which hours you would like the light to be on
and off. Around the outside of the timer face are buttons which each represent 15 minutes of time. To
set the time, press down each button during the time frame that you would like the light to remain on.
Ensure that you plug the timer into a three-prong grounded outlet and then plug the power cord of the
grower into the timer. Ensure that the switch on the top of the timer is set to “timer on”.
You can change the hours that the light is on or off at any time by pulling up or pushing down the but-
tons around the outside of the timer face.
Note: The timer is equipped with a 3 prong grounded plug. Never attempt to disable or remove the
third grounding prong on the timer as this could result in risk of fi re or electric shock.
4
Loading ...
Loading ...
Loading ...