Loading ...
Loading ...
Loading ...
Basic settings en
41
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
Time setting 00:00 - 24:00 Set the current time.
The setting depends on the time format selected.
Time format 12 h
24 h
1
Set the time format.
Time display In hours
Time
1
Set the time display for the end of the pro-
gramme.
"with display "Finish in"" shows the remaining
time the programme has to run, e.g. 3h25min.
"or "Finish at"" shows the time when the pro-
gramme will end, e.g. 15:20hours.
Sprache/Language See selection on the
appliance.
Select the menu language.
Water hardness 0 - 62
16 - 20 medium
1
Set the water hardness.
→"Overview of water hardness settings",
Page30
Rinse aid dispenser 0 - 6
5
1
Set or switch off the amount of rinse aid to be dis-
pensed.
→"Setting the amount of rinse aid", Page33
Sensor setting Standard
1
Sensitive
Very sensitive
Set the water sensor for identifying soiling.
→"Sensors", Page14
Extra Dry on
off
1
Switch Extra Dry on or off for each operation.
For a better drying result the temperature is in-
creased during the final rinse. This may increase
the running time slightly.
Please take care with delicate tableware.
Water connection Cold water
1
Hot water
Set cold water or hot water connection.
Only set the appliance to hot water if this can be
prepared with little energy and a suitable installa-
tion is available, e.g. solar heating system with
circulation line. The water temperature should be
at least 40°C and max. 60°C.
1
Factory setting (may vary according to model)
Loading ...
Loading ...
Loading ...