Loading ...
Loading ...
Loading ...
47
FUNCTION (continued)
Size Switching (continued)
RGB signal input
You can select a suitable size depending on the resolution.
Full 4:3
Display Area Selection Diagram
Resolution Full 4:3
640 x 400 (VGA)
640 x 480 (VGA)
800 x 600 (SVGA)
1024 x 768 (XGA)
1280 x 768 (WXGA)
1280 x 1024 (SXGA)
1360 x 768 (WXGA)
Multi Picture Mode
With this feature, you can watch different channels simultaneously on one screen in several ways.
As for the available signals, please refer to "Recommended Signal List" on
57
,
58
.
Activate the Multi Picture Mode in HDMI Mode
To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press on
the remote control.
2-picture mode
You can watch two different pictures side by side.
This mode is available in both TV mode and AV mode ( AV1~4 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
Switch the Input modes (HDMI1~3) on the Main-Screen.
Switch the Input modes (DTT/TV and AV1~4) or change
Channels on the Sub-Screen.
1. To shift the speaker icon , press button.
Ɣ
The speaker icon will be shifted from A to B back-and-forth.
2. To change the channel of the of the Sub -Screen
Ɣ
Make sure that mark is located on the Sub -Screen.
Ɣ
Press to select channels.
3. To change the Input mode of the Sub -Screen
Ɣ
Make sure that the speaker icon is located next to the Input mode indication of
the Sub -Screen
Ɣ
Press Input Select buttons on the remote control. ( DTV/TV , AV1~4 are available)
NOTE
Ɣ
The message “ Not Available” will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
The selected picture with speaker icon
Main-Screen Sub-Screen
A
B
HDMI 1
Loading ...
Loading ...
Loading ...