User Manual - Page 78

For 2003 MERCURY MOUNTAINEER.

Loading ...
Loading ...
Loading ...
To reset the oil monitoring system to your personalized oil life %:
1. Press the SETUP control to
access the System Check function.
2. Press and release the RESET
control to display OIL LIFE XX%
HOLD RESET NEW.
3. Press and hold the RESET
control for 2 seconds to display IF
NEW OIL HOLD RESET.
4. Release the RESET control
momentarily, then press RESET and
SETUP controls at the same time to
activate a service mode which will
display OIL LIFE XX% RESET TO
ALTER.
5. Press RESET until you find your personalized OIL LIFE XX%.
6. With your personalized OIL LIFE XX% displayed, press SETUP to
continue the system check.
TIRE PRESSURE SYSTEM OFF (if equipped). Displayed when the
tire pressure monitoring system is turned off. Only your dealer can turn
the system on or off. It is recommended that the tire pressure
monitoring system is always turned ON.
DATA ERR. These messages indicate improper operation of the vehicle
network communication between electronic modules.
Fuel computer
Oil life
Charging system
Door sensor
Washer fluid
Brake fluid
Compass
Outside temperature
Engine sensor
Contact your dealer as soon as possible if these messages occur on a
regular basis.
Driver Controls
78
Loading ...
Loading ...
Loading ...