Loading ...
Loading ...
Loading ...
9
OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material and promotional labels before
using the appliance for the first time.
Wipe the hotplates with a soft damp cloth
and dry thoroughly.
Place hotplate on a dry, level heat resistant
surface.
Completely unwind power cord and insert
power cord into a 230/240V power outlet.
Switch on at the power point.
Place a saucepan, in which the food will be
cooked, on the hotplate.
Select the desired temperature setting (from
1-8) using the temperature control dial. The
temperature settings are adjustable and can
be changed at any time during the cooking.
NOTE
The “heating” indicator light will
Illuminate when the hotplate is
preheating and cooking. The heating
light may cycle on and off during
operation. This cycling is normal and
indicates that the correct temperature
is being maintained.
NOTE
When turned on for the first time, the
Breville Hotplate may give off vapours
for up to 15 minutes. This is due to
the protective substances on the
heating elements. There is no need for
concern and the vapours will dissipate
with use.
NOTE
To achieve optimum performance,
ensure the diameter of the cooking pot
or pan is no larger than the diameter
of the hotplate.
To switch the hotplate off, turn the
temperature control dial to the OFF position
and turn the power off at the power outlet
and unplug power cord.
WARNING
Fully unwind power cord before
use. do not allow power cord to
come in contact with hot plate. do not
move hot plate until it is completely
cooled down.
WARNING
Always keep in mind that the hotplates
will continue to radiate residual heat
after being switched off.
WARNING
No more than 5 litres of water can be
boiled at any time. for more efficient
performance it is recommended to use
a lid when boiling water.
Loading ...
Loading ...