Loading ...
Loading ...
Loading ...
2 Place charging glass (select models) on top of the charging base
and place handle in glass (Fig. 5).
-
The charge indicator flashes green until fully charged (Fig. 6).
-
Rapid yellow flashing indicates charge is extremely low (fewer
than 3 uses left).
Note: It takes at least 24 hours to fully charge the battery.
This charger is designed to properly charge only one handle at a time.
This charger is not compatible with other models of Sonicare.
Using the appliance
Brushing instructions
1 Wet the bristles (Fig. 7).
2 Apply a small amount of toothpaste on the bristles (Fig. 8).
3 Place the toothbrush bristles against the teeth at a slight angle (45
degrees), pressing firmly to make the bristles reach the gumline or
slightly beneath the gumline (Fig. 9).
Note: Keep the center of the brush in contact with the teeth at all
times.
4 Press the power on/off and mode button to turn on your Philips
Sonicare (Fig. 10).
5 Gently keep the bristles placed on the teeth and in the gumline.
Brush your teeth with small back and forth motion so the bristles
reach between the teeth (Fig. 11).
Note: The bristles should slightly flare. Do not scrub.
6 To clean the inside surfaces of the front teeth, tilt the brush handle
semi-upright and make several vertical overlapping brushing
strokes on each tooth (Fig. 12).
7 Begin brushing in section 1 (outside top teeth) and brush for 30
seconds (45 seconds in Deep Clean mode) before moving to
section 2 (inside top teeth). Continue brushing in section 3 (outside
bottom teeth) and brush for 30 seconds (45 seconds in Deep
Clean mode) before moving to section 4 (inside bottom teeth (Fig.
13)).
11
English
Loading ...
Loading ...
Loading ...