Loading ...
Loading ...
Loading ...
4 Press the on/off button on SmartClean to start
the cleaning program.
During the cleaning phase, the cleaning symbol
flashes. When the cleaning phase is done (after
approx. 10 minutes), the cleaning symbol lights
up continuously.
Next, the ready symbol lights up continuously.
30 minutes after the cleaning program and
charging are done, SmartClean switches off
automatically.
The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Charging takes approx. 1 hour.
5 To let the shaver dry, you can leave it in the
SmartClean system until your next shave. You
can also remove the shaver from the
SmartClean system, shake off excess fluid, open
the shaving unit and let the shaver air-dry.
Press to open the SmartClean cap, to remove
the shaver from the holder ('click').
Note: If you press the on/off button of SmartClean
during the cleaning program, the program stops. In
this case, the cleaning or drying symbol goes out.
Note: If you disconnect SmartClean from its power
supply, the cleaning program stops.
Replacing the SmartClean cartridge
Replace the cleaning cartridge when the
replacement symbol flashes orange or when you
are no longer satisfied with the cleaning result. If
you clean the shaver with SmartClean once a
week, the cartridge lasts approximately three
months.
25
English
Loading ...
Loading ...
Loading ...