Loading ...
Loading ...
Loading ...
44
SETUP menu
Item Description
KEYSTONE
Using the ▲/▼ buttons corrects the vertical keystone distortion.
Shrink the top of the image
Shrink the bottom of the image.
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the horizontal lens shift is not set to the center, this function
may not work well.
• This function is unavailable when the TRANSITION DETECTOR
(
74) is ON or the screen is adjusted by PERFECT
FIT (
26).
PERFECT FIT
Selecting this item displays the KEYST
ONE_PERFECT FIT dialog.
For details, see PERFECT FIT in Correcting the distortion (
26).
• This is unavailable when the TRANSITION DETECTOR is ON
(
74).
AUT
O ECO MODE
Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.
ON
OFF
• When ON is selected, the projector will always be set to Eco mode
at start-up regardless of the ECO MODE (
below) setting.
An OSD
message “AUTO ECO MODE” will be displayed for tens of seconds
when the projector starts with this function activated.
ECO MODE
Using the ▲/▼ buttons turns off/on the Eco mode.
NORMAL
ECO
• When the ECO is selected, acoustic noise and screen brightness
are reduced.
• When AUTO ECO MODE (
above) is set to ON, the projector will
always be set to Eco mode at start-up regardless this setting.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
If the Transition Detector is on and MIRROR status is changed,
TRANSITION DETECTOR ON alarm (
74) will be displayed when
projector is restarted after the
AC power is turned off.
(continued on next page)
Loading ...
Loading ...
Loading ...