Loading ...
Loading ...
Loading ...
USING YOUR CONVECTION HEATER
Page 8
Note: For models with a Timer control please see page 10 - 12
1. Before connecting your appliance to the mains socket,
position the appliance upright on the floor away from
curtains, furniture or wall coverings.
2. Insert the mains plug into a suitable 13 Amp mains socket.
3. The appliance has 3 heating elements. Turn the Power Control
dial to the required position
4. Turn the Thermostat Control to the desired position. It is
recommended to select the highest position to pre heat the
appliance. It will take 5 -10 minutes for the appliance to fully
heat up, the time taken for the heater to heat the room it is
located in will be dependent on the size of the room and the
ambient temperature of the room. The indicator light will
illuminate when the unit is working, but the light will cycle on
and off when the thermostat control is set on a low setting
and the heater is then maintaining the room temperature.
Note: this appliance will not operate if the thermostat has been
set too low.
Note: If the thermostat dial is set toward the maximum setting
and the power control is set to off then the indicator light will stay
illuminated. No heat will be emitted as the power to the heating
elements is off.
0 - Power OFF Off
I - Low heat ON 750W
II - Medium heat ON 1250W
III - High heat ON 2000W
Loading ...
Loading ...
Loading ...