Loading ...
Loading ...
Loading ...
Controls and Features
Fresh-Food Refrigerator
9
Glass
shelves
Tempered glass shelves in the fresh-food
refrigerator are removable for easy cleaning
or for storing larger items.
To remove a shelf, open the door
completely to avoid potential damage to
the gasket. Lift up on the back of the shelf
slightly. Tilt the shelf to one side at an angle
while pulling forward.
To replace a shelf, open the door
completely to avoid potential damage
to the gasket. Tilt the shelf to one side
at an angle and slide toward the back
wall, placing one side onto the shelf
support. Place the other side onto the
opposite shelf support. Ensure rear locking
tabs are engaged. When installed properly,
the shelf will not slide forward when gently
pulled.
To remove, lift up on the back of the shelf Tilt the shelf at an angle while removing
or replacing
Place in slots when replacing the shelf
Appearance may vary
QuickSpace
™
Shelf
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
Step 1: Lift the back edge of the front half
of the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of the front half
of the shelf while sliding it underneath the
back half.
The entire Quick Space shelf can be removed
and replaced (see Glass Shelves section).
Step 3
Step 1
Step 2
Loading
tips and
suggestions
•Do not block the thermistor, located
on the right hand side, just above the third
shelf of the fresh-food refrigerator. Blocking
the thermistor could impair the air
circulation and temperature control.
Loading ...
Loading ...
Loading ...