User Manual - Page 109

For Limited Nightshade Edition.

Loading ...
Loading ...
Loading ...
107
3-2. Opening, closing and locking the doors
3
Operation of each component
4RUNNER (U)
Battery-saving function
The battery-saving function will be activated in order to prevent the electronic
key battery and the vehicle battery from being discharged while the vehicle is
not in operation for a long time.
In the following situations, the smart key system may take some time to
unlock the doors.
The electronic key has been left in an area of approximately 6 ft. (2 m) of
the outside of the vehicle for 10 minutes or longer.
The smart key system has not been used for 5 days or longer.
If the smart key system has not been used for 14 days or longer, the doors
cannot be unlocked at any doors except the driver’s door. In this case, take
hold of the drivers door handle, or use the wireless remote control or the
mechanical key, to unlock the doors.
The system will resume operation when
The vehicle is locked using the door handle lock switch when carrying the
electronic key on your person.
The vehicle is locked/unlocked using the wireless remote control.
(P. 97)
The vehicle is locked/unlocked using the mechanical key. (P. 451)
Conditions affecting operation
The smart key system uses weak radio waves. In the following situations, the
communication between the electronic key and the vehicle may be affected,
preventing the smart key system, wireless remote control and engine immobi-
lizer system from operating properly. (Ways of coping: P. 451)
When the electronic key battery is depleted
Near a TV tower, electric power plant, gas station, radio station, large dis-
play, airport or other facility that generates strong radio waves or electrical
noise
When carrying a portable radio, cellular phone, cordless phone or other
wireless communication device
Interior alarm sounds
once.
The engine switch was
pressed after the doors
were unlocked with the
mechanical key.
Touch the electronic
key to the engine
switch while depressing
the brake pedal.
The engine switch was
pressed two consecu-
tive times without the
electronic key being
present.
Alarm Situation Correction procedure
Loading ...
Loading ...
Loading ...