Loading ...
Loading ...
Loading ...
Assembling
Before assembling, please
drain the water inside the
tank, and check whether the
washer is reversed or not.
1.Insert the head into the
hole.
2.Fit the tank along the
guides on the door.
3.Press down on the two
side of the tank.
4.When you hear a click
sound, that means the
installation is completed.
Warning!
1.Be careful not to press on
the head;
2.When fitting the water
tank, ensure the head
inserted into the hole first;
3.If you found the washer
reversed or loosed when
removing the tank, you
must take off the fixed
holder by contrarotating it
first, then put the washer to
the correct position, and
install the fixed holder at
last.
Filling water
Before you fill the drinking
water into the water tank,
ensure that the water tank is
steady and in a correct
position.
Caution!
Fill with water up to 3L
(which is suggested), and
not above the level.
Otherwise, it may overflow
when the lid is close.
We recommend that you fill
the water by the following
ways.
1. Remove the small lid and
fill water from the inlet of the
large lid.
2. Remove the cover of the
tank, and then fill water
inside directly.
Small lid
Large lid
Head
Slot
Guide
① ②
④
③
Hisense Refrigerator
●
fixed holder
washer
wrong position
correct position
●
17
Loading ...
Loading ...
Loading ...